Skip to main content

Site Navigation

Your Account

Choose Language

Help

Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.

Easy

Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.

Moderate

Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.

Difficult

Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 3 × 25mm wide 1430 long PVC (16 atm) pipes
  • 1 × plexiglass sheet 400x400x5mm
  • 4 × plexiglass sheets 250x250x5mm
  • 1 × 6m brass wire 3 mm
  • 1 × package of tire ups
  • 1 × copper sheet 100x180x0.5mm
  • 1 × PVC plexiglass glue
  • 1 × Type-N connector
  • 1 × Cost and alternative materialsIn EU cost is calculated around 60 euros Instead of plexiglass polycarbonate sheet can be used Instead of PVC pipes Polypropylene pipes can be used Brass is used since it’s more rigid than copper and able to maintain it’s form. Using copper can also be used alternately.
Add New

Your contributions are licensed under the open source Creative Commons license.