Assemble the top part using the top bracket (3D printed) and the M6 bolts as shown.
Cut the sides of the L channel aluminum beams on each of their edges by aprox 20mm and then bend them gently inwards. Then drill M4 holes on the bended side.
Attach the L channel aluminum to the 20x20 aluminum beams as shown using M4 bolts.
Insert an M4x20mm bolt on the top bracket, and secure it with a bolt in place as shown. This will be used to tighten in place the vertical aluminum tube.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.