Next we will be installing the N-type connector to our ground plane.
Any N-type connector (or other connector you would like) can fit. Just make sure you are not short-circuiting the core with the outside casing.
In our case we are using 2x M3x10mm with 2xM3 nuts and 2x M4 washers (to fit our grid)
You can optionally solder the whole thing together, just to be on the safe side for the connection.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.