Using double sided foam tape, place the TP Link on the side as shown. CN:用发泡双面胶把TP Link路由器粘贴在一侧
Place SatNOGS PCB as shown (with foam tape).CN:把发泡双面胶带及PCB板放在图示位置
Place SatNOGS PSU PCB as shown (with foam tape).CN:同上
Stick with foam tape and connect the USB hub as shown.CN:按图示粘贴及连接USB hub
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.