In our example we will use brass wire, 1.5mm wide from a 60cm diameter packaging. We cut more than 6m. (our final length shall be 5696mm).
Due to the fact that one turn equals 5696/8=712mm the diameter must be 712/π=226mm aprox. Turning must be clockwise or counter-clockwise depending whether it’s a RHCP or a LHCP antenna.
Using any cylindrical object (in our case kitchen ware) we turn the wire in 23-24cm perimeter.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.