Opto-endstop holders need to be assembled next. You will need 2x H21LOB with Breakout, 2x Homing sensor holder 3D printed, 4x M3 x 16mm and 4x M3 nuts
Secure the opto-endstops with the M3 bolts as shown on the homing sensor holder.
Your Opto-endstop assemblies are ready!
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.