Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 14 —

Step Type:

Drag to rearrange

Apply masking tape on top of the gear assemblies reversely (sticking side up) notching the holes (4 for each gear assembly).

Place the cover of the box carefully and remove it to see the tape stuck underside with holes marked.

Drill holes on box cover.

Mechanical Assembly is now finished!

Electronics still need to be placed inside. Once they are in, you should use 8 M4 bolts to secure the cover of the box in place.

Your contributions are licensed under the open source Creative Commons license.