Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by FightSilife

Edit approved by FightSilife

Before
After
Unchanged

Step Lines

[* black] You will need 2 USB micro cables.cables.CN:需要两个迷你USB线
[* yellow] One USB micro cable should start from the PSU PCB and end to TP-Link (for power supply)supply).CN:其中一条从PSU板子连到TP Link,用于供电
[* blue] The other USB Micro cable should start from the USB Hub and end to the Arduino Micro (for data connection)connection).CN:另外一条从USB hub到迷你Arduino的板子,用于数据传输
[* black] You have now finished all electronics setup of your Ground Station.Station.CN:现在你已经完成了电路部分的组装
[* black] You will need 2 USB micro cables.cables.CN:需要两个迷你USB线
[* yellow] One USB micro cable should start from the PSU PCB and end to TP-Link (for power supply)supply).CN:其中一条从PSU板子连到TP Link,用于供电
[* blue] The other USB Micro cable should start from the USB Hub and end to the Arduino Micro (for data connection)connection).CN:另外一条从USB hub到迷你Arduino的板子,用于数据传输
[* black] You have now finished all electronics setup of your Ground Station.Station.CN:现在你已经完成了电路部分的组装