Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by FightSilife

Edit approved by FightSilife

Before
After
Unchanged

Step Lines

[* yellow] Using double sided foam tape, place the TP Link on the side as shown. CN:用发泡双面胶把TP Link路由器粘贴在一侧
[* red] Place SatNOGS PCB as shown (with foam tape)tape).CN:把发泡双面胶带及PCB板放在图示位置
[* orange] Place SatNOGS PSU PCB as shown (with foam tape)tape).CN:同上
[* blue] Stick with foam tape and connect the USB hub as shown.shown.CN:按图示粘贴及连接USB hub
[* yellow] Using double sided foam tape, place the TP Link on the side as shown. CN:用发泡双面胶把TP Link路由器粘贴在一侧
[* red] Place SatNOGS PCB as shown (with foam tape)tape).CN:把发泡双面胶带及PCB板放在图示位置
[* orange] Place SatNOGS PSU PCB as shown (with foam tape)tape).CN:同上
[* blue] Stick with foam tape and connect the USB hub as shown.shown.CN:按图示粘贴及连接USB hub