SatNOGS Radome v1

Written By: Pierros Papadeas
  • Comments: 1
  • Favorites: 0

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

  1. Gather all materials, 3D printed and pipes. Gather all materials, 3D printed and pipes.

    • Gather all materials, 3D printed and pipes.

    Edit

  2. Start by assembling the base pentagon. Drill and bolt in place using M6 bolts the L Aluminum channels to form the pentagon. Using the Pentagon Base 3D printed part and the small PVC pipes, bolt it in place on a pentagon corner.

    • Start by assembling the base pentagon.

    • Drill and bolt in place using M6 bolts the L Aluminum channels to form the pentagon.

    • Using the Pentagon Base 3D printed part and the small PVC pipes, bolt it in place on a pentagon corner.

    • Start the dome on top of the small PVC pipe, using the 3D printed Pentagon Stand 1.

    Edit

  3. Work your way upwards to the second and third level. Use a, b or c connectors as per design. Consult the drawings for A, B, or C pipe positioning.

    • Work your way upwards to the second and third level.

    • Use a, b or c connectors as per design.

    • Consult the drawings for A, B, or C pipe positioning.

    • The connectors have helpful marks for the different kinds of pipes that connect to them. Use them!

    • Continue to 3rd level to complete the half dome.

    Edit

  4. Now, start building the dome from the top, working your way down. The top structure is a pentagon. Use holding tape if needed for assembly.

    • Now, start building the dome from the top, working your way down.

    • The top structure is a pentagon.

    • Use holding tape if needed for assembly.

    • Work your way to next levels, completing the other half of the dome.

    Edit

  5. Place the top half on top of the half bottom dome.

    • Place the top half on top of the half bottom dome.

    • Fasten everything together and apply glue if needed (depending on materials used)

    • Work in Progress Guide

    • More Steps to follow soon!

    Edit
Finish Line

Author

Pierros Papadeas

Member since: 04/23/2014

965 Reputation

7 Guides authored

One Comment

Could you post the 3d print files and a list of quantity and length of the PVC segments?

anniepolish - Resolved on Release Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,123