You're viewing a previously published revision of this guide.  View latest revision

Older
Sep 24, 2014 - 03:09:53
Jun 13, 2017 - 11:06:40 Jun 13, 2017 - 11:06:28 Jun 13, 2017 - 11:06:09 Jun 13, 2017 - 11:06:54 Jun 13, 2017 - 11:06:08 Sep 24, 2014 - 10:09:34 Sep 24, 2014 - 10:09:27 Sep 24, 2014 - 10:09:27 Sep 24, 2014 - 03:09:05 Sep 24, 2014 - 03:09:02 Sep 24, 2014 - 03:09:53 Sep 24, 2014 - 03:09:53 Sep 24, 2014 - 02:09:30 Sep 24, 2014 - 02:09:50 Sep 23, 2014 - 03:09:34 Sep 23, 2014 - 03:09:00 Sep 23, 2014 - 03:09:00 Sep 23, 2014 - 02:09:43 Sep 23, 2014 - 02:09:32 Sep 23, 2014 - 02:09:32 Sep 23, 2014 - 02:09:51
Newer

SatNOGS Ground Station v2 Electronics Assembly

Written By: Pierros Papadeas (and one other contributor)
  • Comments: 2
  • Favorites: 1
  • Completions: 1

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

  1. Electronics Assembly You will need:

    • Electronics Assembly You will need:

    • The SatNOGS v2 Mechanical Ground Station Assembly.

    • TP-Link WR703N

    • SatNOGS PCB

    • SatNOGS PSU PCB

    • A 4 port USB hub

    • 2 USB micro cables

    • One double wire for 12V to SatNOGS PCB

  2. Using double sided foam tape, place the TP Link on the side as shown. Place SatNOGS PCB as shown (with foam tape) Place SatNOGS PSU PCB as shown (with foam tape)

    • Using double sided foam tape, place the TP Link on the side as shown.

    • Place SatNOGS PCB as shown (with foam tape)

    • Place SatNOGS PSU PCB as shown (with foam tape)

    • Stick with foam tape and connect the USB hub as shown.

Author

with 1 other contributor

Pierros Papadeas

Member since: 4/23/14

965 Reputation

7 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 19

All Time: 10,998